Mould remediation: The specialist in mould removal
Our expert mould remediation services offer innovative and sustainable solutions to remove mould effectively and permanently.
We are at your service!
Qualified professionals
An effective solution
Competitive prices
Mould in the home is not only unpleasant, but can also cause damage to your health and home. Black spots, musty odours or damp wallpaper indicate a poor indoor environment. It is important not only to remove mould, but also to prevent its recurrence. Lavos Total Service helps you do this quickly and effectively.
We specialise in inspect, treat and prevent of mould. Besides removing visible mould, we always find out the cause, such as moisture problems or poor ventilation. Thus, we offer a sustainable solution rather than temporary results.
How do you recognise mould in your home?
Mould in the home is often caused by moisture problems and can cause health problems. It is therefore important to recognise the signs early. Look out for the following characteristics:
- Dark or green-black spots on walls, ceilings or in corners
- Tiny dots slowly growing larger
- A musty, damp smell that lingers even after airing
- Loose wallpaper
- Damp walls
- Condensation on windows
If you recognise one or more of these features, there is a good chance of mould growth. In doubt about whether it is mould? We are happy to come non-binding visit for an inspection and clear advice. That way, you know immediately where you stand.
What are the causes of mould?
Mould is caused by moisture accumulating in a room. The most common causes are:
With older houses or poorly insulated walls, moisture from the ground can migrate up into the walls. This leaves the walls damp and mildew often develops low on the floor or in corners.
A leaking pipe, gutter or bathroom can cause long-term moisture build-up. Even a small leakage can cause mould problems over time, especially if it goes unnoticed.
When warm air hits a cold surface, it creates condensation. This happens on cold outside walls or poorly insulated windows, for example. Moisture then stays in one place, allowing mould to quickly form.
Impact on health and home
Health: Mould is not just a visible problem. It can also worsen indoor air quality, which, according to the RIVM could possibly cause symptoms such as irritated eyes, coughing, shortness of breath or worsening asthma.
Dwelling: Mould can slowly cause damage to your home. Think affected walls, loose wallpaper, discolouration and even wood rot. The longer the mould remains present, the greater the repair costs can end up being.
This is how we tackle the cause
When damp air cannot escape properly, it remains trapped in the room. By ventilation improve or mechanical ventilation correctly, moisture gets less chance and the air in your home stays healthier. We watch the air flow in the room and ensure that moist air is removed faster and better.
With rising damp the wall pulls up moisture from the ground. This can be solved sustainably in two ways:
- Undercut wall: A permanent damp-proof layer is applied to the underside of the wall, preventing moisture from rising.
- Inject with moisture-resistant gel: Here, we apply a special gel into the masonry that forms a barrier against rising damp. This is less invasive and suitable for certain wall types.
Mould can be caused by a leak that is not immediately visible. To solve this problem permanently:
- Leak detection: We accurately trace where the moisture is coming from, even when it is behind walls or ceilings.
- Plug or repair leak: Once the source is found, we repair the leak. We then safely remove the mould and restore the room neatly.
Condensation occurs when warm, moist air precipitates on cold surfaces.
To avoid this, we balance the space:
- Improve air circulation: We install or optimise ventilation grilles, clean or improve ventilation ducts and properly adjust mechanical ventilation systems so that moist air can be removed faster.
- Insulating cold surfaces: By insulating or damp-proofing exterior walls, for example, you prevent water droplets from depositing on the wall.
- Dehumidification if needed: In rooms with structurally high humidity, a dehumidifier can provide support.
Mold removal: by yourself or by a specialist?
It sometimes seems easy to remove mould yourself with cleaners. However, this usually only works on the surface. The mould seems to go away for a while, but often returns quickly because the cause has not been solved. In addition, the mould spores can spread during cleaning, which can actually make the problem worse.
A specialist goes beyond just the visible mould. He first finds out the source of moisture, safely removes the mould and then provides a permanent solution.
Getting rid of mould
Our working method
We work step by step and always include you in this:
- Free inspection: We will visit you and investigate where the moisture and mould are coming from.
- Clear diagnosis and advice: You will receive an overview of the cause, the best approach and the associated costs. Transparent and with no surprises.
- Mold removal: We safely remove the mould, repair the surfaces and address the cause (e.g. ventilation, undercaps, leak detection).
- Finishing and recovery: We ensure that the space is delivered neat and clean so that you can use it again without any worries.
- Monitoring & warranty: We check the result and offer a guarantee on the treatment performed. So you can be sure that the problem is permanently fixed.
What determines the price of mould remediation?
The cost of mould remediation varies from one situation to another. This is because every home, cause and severity of the problem can be different. Which mainly determines the price:
- The extent of mould spots
- The underlying cause (e.g. ventilation, rising damp, leakage)
- Room accessibility (e.g. bathroom, bedroom, basement)
- Necessary repair or finishing work
We always work with clear and transparent prices, so you know exactly where you stand.
Positive customer experience
4.7 / 5 stars out of 200+ reviews
FAQs
You can treat small patches of mould yourself in some cases. However, keep in mind that this usually requires a temporary solution is, as long as the underlying cause is not addressed.
Commonly used resources are: chlorine, cleaning vinegar and soda.
Note: Use these resources separate and do not mix them with each other.
Yes, but we do not recommend this! Before you paint over it, it is important that the mould has been treated and removed. Do you not do this? Then the mould will quickly come back and go through the paint.
Prevent mould by ventilating well every day, heating the air and drying damp areas such as shower walls and floors immediately. Preferably dry wet laundry outside and use a dehumidifier for extra protection if necessary.
Mould is often visible as black, green or white spots on walls, ceilings and other surfaces. It can also cause a musty smell, especially in damp rooms such as bathrooms or basements.
No, mould does not disappear on its own! Although less moisture can slow growth, the spores remain present and can multiply again with an increase in moisture.
Moisture and mould are not always directly responsible for health problems, but according to the GGD however, they can aggravate asthma and other respiratory symptoms. A damp home can lead to sore throat, sneezing, coughing, stuffy nose, wheezing and shortness of breath.
Trusted by 100+ companies
Prevent damage to your home with an effective solution
Prevent damage to your home and health. Get your mould in your home permanently controlled. Our professionals are at your service!
Best prices
Response within 4 hours on weekdays
An effective solution
With warranty on all work
Qualified professionals
With over 30 years of experience
An affordable solution?
Contact us.
No call-out charges and always a quick appointment at your convenience.
Contact details
- Deltazijde 24E, 1261ZM Blaricum
- info@lavostotaalservice.nl
- 035 205 7002